Skip to Content

UN Certified FIBC Bag for Hazardous Goods Supplier India

The only FIBC configuration that meets the mandatory legal requirement for shipping classified dangerous goods in flexible bulk packaging

UN Bag — Sourced From Audited Indian Factories

The only FIBC configuration that meets the mandatory legal requirement for shipping classified dangerous goods in flexible bulk packaging

Request a Quote Send Your Specifications

Overview

A UN Bag is a four-loop woven polypropylene FIBC that has passed the applicable UN test protocol for dangerous goods transport, fitted wiith option to have a top spout and or base discharge spout for controlled emptying of hazardous materials. It is also known as a UN-certified FIBC with spout, a hazmat bulk bag with spout, or a UN-rated spout bag. The typical buyer is a chemical distributor, fertiliser shipper, or dangerous goods logistics provider who must comply with ADR (road), IMDG (sea), or IATA (air) regulations and requires contained, metered discharge at the destination.

The single most important factor a procurement manager must verify is the UN marking on the bag itself — specifically, whether the UN Packaging Code stamped on the body panel matches the packing group and material type being shipped. A bag marked UN 13H3 is not automatically compliant for every hazardous material; your material's UN classification, packaging group, and the maximum gross mass must all fall within what the marking certifies. The most common procurement error is buying on price without verifying that the certificate covers the right material category and packing group — a mismatch discovered at port or customs is not recoverable at short notice. Confirm the current valid certificate for every production batch before shipment.

India has become the dominant source for woven-PP bulk packaging globally, with a supplier base deep enough to carry multiple UN-certified factories. India Pack sources from a network of 10+ FIBC manufacturers, runs specification verification and production oversight, and handles export documentation. Over ten years and 25M+ bags supplied, the business model has been built around verifiable, benchmark-able pricing — FOB or CIF — with no separate sourcing fee. Suppliers and factories hold ISO 21898 and other relevant certifications.


Which FIBC Configuration Do You Need?

Your requirement Recommended
Classified dangerous goods — must comply with ADR, IMDG, or IATA regulations UN Bag 
Static-dissipative requirement for flammable powders or dusts (not a full DG classification) Type C Bag with Label
Standard non-hazardous bulk material requiring controlled base discharge Open Top Discharge Spout Bag
Controlled discharge with skirt top filling opening Skirt Top Discharge Spout Bag
Spout fill and discharge for contained, dust-reduced handling of non-hazardous materials Spout Top Discharge Spout Bag

Technical Specifications

Parameter Specification
Safe Working Load (SWL) 500 KGs to 2000 KGs
Safety Factor Always 6:1
Body fabric Woven polypropylene (PP)
GSM 140-240
Dimensions (L × W × H) Custom to order
Bottom type Discharge spout optional
Top closure Skirt/duffle top / fill spout (specify per order)
Construction Four-loop, With Loop Protector & Top Perimeter band
Lift loops 4
Loop length Custom to order
Liner Without liner (UN 13H3) / With liner (UN 13H4)
Coating Custom to order
Printing Up to 4 colours; UN marking must remain legible and unobscured
Fabric colour Milky White / Custom to order (MOQ apply)
UN Packaging Code UN 13H3 / UN 13H4 
Certification UN certification marking on bag body; ISO 21898
Lead time 6-8 weeks from custom artwork approval

The UN marking on the bag body must match the packing group, material type, and maximum gross mass being shipped. Confirm the current valid factory certificate before each production batch.

Industries and Applications

Chemicals

What's packed: Industrial chemicals classified as dangerous goods under ADR/IMDG/IATA — including oxidising agents, corrosives, and certain toxic solids.

Typical requirement: The applicable UN Packaging Code must cover the chemical's hazard class and packing group. Suppliers and factories hold ISO 21898 and UN certification [VERIFY per factory]. Liner inclusion is determined by the material's properties and the certification scope.

Dangerous Goods Logistics

What's packed: Mixed DG cargo in bulk — consolidation and re-export of classified solids that must remain in certified packaging throughout the supply chain.

Typical requirement: Certification must remain valid and traceable from factory to final destination. The bag's UN marking is the audit trail — confirm batch certificates are supplied with every shipment.

Fertilisers — Ammonium Nitrate Class

What's packed: Ammonium nitrate and ammonium nitrate-based fertilisers classified under relevant DG regulations.

Typical requirement: The applicable UN Packaging Code and packing group must be confirmed against the product's classification. Regulatory requirements for ammonium nitrate vary by jurisdiction — verify the applicable code before ordering.

Hazardous Materials Processing

What's packed: Process chemicals, precursors, and intermediates that carry a DG classification and require certified bulk packaging for in-plant transfer or outbound shipment.

Typical requirement: Base discharge spout enables contained emptying into process equipment without cutting the bag. UN certification provides the regulatory chain of custody documentation.

Explosives Precursors

What's packed: Materials classified as explosives precursors under applicable regulations — where bulk packaging must meet specific DG certification requirements.

Typical requirement: Applicable UN Packaging Code and current valid factory certificate required. Regulatory oversight is significant in this category; confirm requirements with your DG compliance officer before specifying the bag.

Customisation Options

Structural

  • Bag dimensions (L × W × H) — custom to order
  • Spout diameter and length — sized to discharge valve or filling equipment
  • Loop length and loop attachment style
  • Top closure type: open top, duffle top, fill spout

Functional

  • With or without inner liner — liner inclusion may be required by the applicable UN Packaging Code; confirm before specifying
  • Spout tie-off cord type and length
  • Filling and discharge spout lengths for equipment compatibility

Compliance

  • UN Packaging Code — UN 13H3, UN 13H4, or other applicable codes; held at factory level; not an India Pack certification [VERIFY per factory]
  • ISO 21898 — factory-level certification [VERIFY per factory]
  • The UN marking on the finished bag body must remain legible and must not be obscured by printing, labels, or overlapping fabric
  • For static-dissipative requirements in addition to UN certification, cross-reference with Type C Bag with Label

Branding

  • Custom printing on body panels — number of colours 4
  • UN marking placement must comply with applicable packaging regulations; confirm print layout does not interfere with required markings
  • Label panels available for hazmat warning labels and DG shipping marks

Tell Us What You're Packing

Share your material's UN classification, packing group, required UN Packaging Code, dimensions, and approximate annual volume — we will source compliant bags and provide benchmarkable FOB or CIF pricing from audited Indian factories.

Request a Quote Send Your Specifications


Conductive FIBC Heavy Duty Specialist UN Certified

Other products

Baffle FIBC Bag (Q-Bag / Form-Fit) Supplier India
Baffle FIBC Bag (Q-Bag / Form-Fit) Supplier India

Source baffle FIBC Q-bags from audited Indian factories. Up to 30% more payload per container, form-stable filling, flexible MOQs. Send your specifications.
Bespoke Custom FIBC Bulk Bag Supplier India | India Pack
Bespoke Custom FIBC Bulk Bag Supplier India | India Pack

A fully custom-engineered FIBC or PP woven bag built to your exact dimensional, load, liner, and compliance specifications — no catalogue constraints.
4-Panel FIBC | rectangular Bulk Bags Sourced from India
4-Panel FIBC | rectangular Bulk Bags Sourced from India

Source 4-panel FIBC bulk bags from audited Indian factories. Square shape retention for better container fill and stacking. Request a quote from India Pack.
Builders Bag FIBC Bulk Bag Supplier India
Builders Bag FIBC Bulk Bag Supplier India

The standard four-loop FIBC for construction aggregate, rubble, and demolition waste — forklift and telehandler compatible, available in single-trip and multi-trip builds.
Circular FIBC Bag with Centre Perimeter band India | India Pack
Circular FIBC Bag with Centre Perimeter band India | India Pack

A seamless tubular FIBC with a horizontal reinforcing belt that holds bag shape under heavy or dense loads — keeping stacks stable and cube utilisation predictable.
Helicopter FIBC Bag Supplier India | India Pack
Helicopter FIBC Bag Supplier India | India Pack

A single-point lift FIBC designed for safe aerial transport by helicopter or crane — hangs level under load where a standard four-loop bag cannot.

Why source through India Pack

Full transparency — you always know your manufacturer

Once commercials are finalised, we disclose the details of the manufacturing facility producing your order. If you prefer a multi-facility portfolio strategy, we share the details of each qualified facility we've matched to your specifications.

The purchase order is raised directly in the name of the manufacturing facility — not India Pack — so there's no ambiguity about who is producing your goods. On request, we'll also arrange a direct introduction with a key contact at the facility.

We don't hide the factory behind us. You see exactly who you're buying from, and we earn our place by managing the relationship, the quality, and the documentation around it — not by controlling access to it.

Scale that works in your favour

We don't represent one buyer to one factory. India Pack brings a portfolio of buyers to a network of manufacturing facilities, and sitting in that position is what gives every buyer we work with an advantage they couldn't get alone.

It shows up first in capacity. At select facilities we hold dedicated production lines; across the rest of the network, the volume we place earns us priority. For you, that means your order isn't queued behind a factory's larger customers, and a busy season doesn't push your delivery date out.

It shows up in price. The combined volume we place gives us negotiating weight that most individual buyers can't match, so the quote you receive is competitive on a like-for-like specification — one you can hold directly against your existing suppliers and judge on the same terms.

It shows up most when something goes wrong. A factory settling a claim isn't weighing one order against the cost of fixing it; it's weighing the relationship with everything we bring them. That's the difference between a claim that drags and a claim that gets settled.

And because we're in these facilities every day, we know first-hand which one excels at a given specification, which to avoid for a particular material, and where quality actually holds. It's why we can match your bag to the right factory the first time.

The right bag, at the right weight — and the right price, every time you reorder

A bulk bag's cost is driven largely by how much fabric goes into it. Over-specify the weight and you pay for material you don't need; under-specify it and the bag fails in handling. We engineer each bag to the optimum fabric weight for your actual load and handling conditions — strong enough to perform reliably, without the cost of over-built material you'll never use.

We benchmark that specification across our facility network so your first quote is competitive — sharp because the bag is specified correctly, not because it's cut short. And we keep benchmarking on every reorder. Raw material prices move, and so should your price — down as well as up. You won't find a low opening quote that quietly drifts upward once the relationship is established. The price stays honest because we keep checking it against the market, order after order.

Transparent pricing, no separate fees

You don't pay India Pack a separate service fee or commission. We act as your level-one procurement office in India, and our pricing is all-inclusive — so you can compare our quote directly against your existing suppliers, like for like. What you save is in the price, not in a separate line item.

Order flexibility — build a container on your terms

You don't have to place a full-container order all at once, or commit to a single bag specification. Within an order you can mix specifications, and we select facilities capable of producing the range you need — so a single container can carry the mix your operation actually requires.

You can also build a container over time. Place orders as your requirement firms up, and we'll keep the container open — with the price of each order locked at the point you place it — until the load is complete. You're not forced to forecast a full container in one go or accept a price that moves while you wait.

Two practical limits keep this clean: we hold a container open for up to 20-25 days from your first order, and dispatch lead times begin once the container composition is final and the load is full. For procurement teams used to committing to full single-spec containers upfront, that flexibility removes both the forecasting pressure and the risk of over-ordering.

Factory access without factory risk

India Pack maintains active sourcing relationships with 10+ FIBC manufacturers across India. When a factory hits a capacity constraint or a quality issue, we give you the option to switch production without interrupting your supply. You don't restart vendor qualification from scratch — we carry that burden for you.

Documentation managed end to end

We manage the complete export documentation set — commercial invoice, packing list, certificate of analysis, SWL test certificates, packing inspection report, and any third-party inspection reports — so your import clearance proceeds without delays or amendment requests. We have supported buyers in Europe, USA, Canada, Middle East, Australia, and New Zealand across food processing, chemicals, construction and mineral trading.

Send us your specs and we'll come back with supplier options and a quote. Don't have them finalised? Tell us what you're packing and where it's going — we'll help you build the right specification. Distributors or end-users, you bring the requirement and we handle the supply.

Send Your Specifications

Frequently Asked Questions

We are a sourcing partner, not a factory. We connect you to a network of audited Indian manufacturers, match each order to the right plant, and manage specification, quality, and shipment on the ground.

Yes. For custom branding, we review your artwork files for resolution, print alignment, and fit to the bag geometry. If you don't have technical drawings or layouts ready, our team drafts the bag specification sheets and print-ready layouts for your approval.

We treat your designs, artwork, and intellectual property as confidential. Confidentiality terms are enforced down the supply chain with our manufacturing partners in India.

We provide free prototype samples of standard or readily available fabric specifications for your evaluation and physical testing, shipped through international couriers such as DHL, FedEx, UPS, DPD, or Interparcel.

We provide up to 2 samples completely free of cost, with courier included. Beyond that, additional samples remain free of charge and you cover only the courier.

Standard manufacturing lead time for an initial order is 5–8 weeks from final artwork and specification sign-off, with advance payment or LC opening. Repeat orders with identical specifications often run faster, as plants pre-schedule production blocks and keep printing plates ready for mounting.

Bags are hydraulically compressed, wrapped in moisture-resistant, UV-stabilised PP sheets, and bound with high-tensile bands for long transit. Each bale carries multi-sided, waterproof labels showing your PO number, bag specifications, quantities, and weights.

Average full-container transit times are 35–45 days to Europe (via the Cape), 30–40 days to the US East Coast, 35– 45 days to the US West Coast and New Zealand, and 45–55 days to Latin America. Actual schedules vary with seasonal carrier routing and whether the load is FCL or LCL. We keep you posted about the status of the shipment

Air blowing and suction remove loose PP fragments and dust using filtered, oil-free compressed air and vacuum extraction. Light-table inspection checks every seam against backlighting to catch dropped stitches, pinholes, or weave defects. if specified we run Bags though Metal detection to confirm no embedded needle fragments or metallic tools remain.

In case of a claim we are your representative to the company, We review production records alongside your photos or videos to identify the root cause. If a manufacturing defect is verified, we issue a credit or replacement and update factory protocols to prevent recurrence.

Our facilities run in-house load tests on every production run. Certified test reports and label proofs are sent to you for verification and approval before dispatch. We share pre production bag photos to confirm that bags are being mass produced as per your specification. This would include Safety Label, Print artwork, Pre production Print Panel, Printing, Bag dimensions, accesories

We provide high-strength overlock and safety stitching, along with double-needle stitching options based on your application and handling needs. Because stitching directly dictates the bag's Safe Working Load (SWL), every seam meets industrial safety standards.

Yes, we supply both J-fold and Butterfly-fold edge construction depending on your facility's filling infrastructure.

We offer single, double, and triple sift-proofing, using high-density filler cords and non-woven felt layers sewn directly into the seams to plug needle holes. For ultra-fine or hygroscopic materials, we can integrate heavy-duty polyethylene (PE) internal liners for dust-proof and moisture-proof security.

Yes, we source food-grade and pharmaceutical-grade big bags produced in BRCGS-certified cleanroom facilities that meet US FDA and European standards. These bags undergo pest control, metal detection, and hygiene audits to support contamination control for sensitive ingredients.

Type A bags provide no static protection and suit non-flammable materials. Type B bags prevent propagating brush discharges but are not rated for flammable solvent or gas atmospheres. Type C (conductive) bags use interconnected conductive threads and must be grounded during filling and discharge. Type D (dissipative) bags safely release charge into the air without a ground connection.

Yes, we offer full design flexibility including duffel tops for easy manual filling, open tops, and conical discharge spouts for sticky or sluggish materials. Our technical team matches the bag's openings to your filling and discharging equipment.

Our standard loop colours are white, blue, and black. We can provide other colours free of charge if currently in stock. For custom, Pantone-specific colours, a minimum order quantity (MOQ) of 2 MT applies.

A B-Lock (or cord lock) is a heavy-duty plastic or metal locking device attached to the tie-strings of a bag's spout, usually the discharge spout. It lets operators lock the spout closed and adjust or release it during emptying without untying tight knots.

A Hose Slider is a closure mechanism that regulates or completely stops material flow through the discharge spout. It works by sliding a rigid bar or collar over the spout to pinch it shut, giving operators precise control when partially emptying a bag.

We supply to your required safety factor. Industry standard is 5:1 for single-trip bags and 6:1 for multi-trip bags, with UN-certified bags for dangerous goods built to a 6:1 minimum.

Single-trip bags are designed for one filling and discharge cycle and are the most cost-efficient choice for one-way shipments. Multi-trip bags use heavier GSM fabric and a higher safety factor for repeated reuse. We match the construction to how the bag will be used.

Yes. We add UV stabilisers to the fabric for bags stored or handled outdoors, rated to 200 KLY to 350 KLY.

Baffle bags have internal fabric panels at the corners that hold the bag's square shape when filled, so it doesn't bulge. That lets you load more product per pallet and stack more stably in containers and warehouses. See our Baffle FIBC page for full specifications.

Coated (laminated) fabric adds a moisture and sift barrier and suits fine or hygroscopic powders. Uncoated fabric allows the bag to breathe, which suits products that need ventilation such as some agricultural goods. We recommend based on your product.

We offer loose, form-fit, and tubular polyethylene liners, EVOH liners, plus aluminium-foil liners for moisture- or oxygen-sensitive products. The liner type depends on your product's barrier needs.

The most common sizes are A4 (full-page documents and manifests) and A5 (smaller labels and barcodes). Custom sizes can also be made. Two closure options are available:
  • Standard Flap: a top or side opening with an overlapping flap to keep out dust.
  • Ziplock (resealable): maximum protection against rain, moisture, and grime.

The minimum order quantity for coloured fabric is 3 MT. A specific Pantone colour number is always required for production.

We produce woven PP fabric across a range of weights to match your strength and cost needs, from 55 GSM to 240 GSM additional coating 30 gsm

Yes. We source BOPP-laminated woven bags with high-definition print for consumer-facing and retail-grade packaging, giving sharp graphics and a moisture barrier in one structure. MOQ's apply